Simple Ham Radio Antennas

Over the past 37 years as a licensed amateur operator, I've accumulated a wide variety of antenna reference material, including books, magazine articles, and topics discussed on amateur radio forums.  All ARRL members can further augment their antenna research by accessing the digital files of " QST ", the offical journal of the ARRL.  All told, there is an almost endless resource of antenna building ideas for most every ham station. Recently, I began to put some of these "classic ideas" to use on my new property in the Puna District of Hawaii Island .  I now have an acre of space to "plant" my antenna "farm"--quite a change from my present rental home which is hemmed in by neighbors and utility poles.  Although my neighbors have been tolerant of my amateur radio pursuits, I try to keep a low profile.  Namely, my verticals and inverted vees are usually lowered when they are not in use and, because of my part-time employment as a sports an

So far, the "tunerless" antennas I've built have worked very well.  They have been made with locally available materials from my "junk" box, neighborhood garage sales, and the nearby Ace Hardware Store.  These antennas have consisted of individual dipoles/inverted vees for my bands of preference (40, 20, 15, 10 meters), telescoping fiberglass masts (33-ft/10.06 meters tall), a single RG -8X coaxial feed line , and supporting wooden stakes or tree branches. Dipoles for each band were built on the ground and were later hoisted into position via a halyard and pulley system.  A "choke balun" made from part of the RG-8X feed line was attached to the mast just below the center connector at the top of the mast. In my first multiband antenna system, I changed bands by lowering and raising the appropriate antenna into place.  I couldn't change bands by staying in the shack. My second system was a modified "fan dipole/inverted vee" using mul

In some of my previous posts, I've investigated, built, and used multiband dipole and inverted vees using a single 50 ohm coaxial feed line .  With a telescoping fiberglass mast (33-ft/10.06 meters extended), a simple halyard and pulley system, and separate antennas cut for each band of use (40, 20, 15, and 10 meters), I've been able to change bands fairly quickly by lowering the dipole/inverted vee elements, substituting those of another band, and raising the new antenna.  With each band element cut for the desired frequency, the efficiency is high with low swr for that band.  Since each antenna element is trimmed for the lowest swr at my mast location, an antenna transmatch isn't necessary.  Sometimes, as in the case with the 40 meter dipole/inverted vee, an antenna cut for the cw portion of the 7 MHz band will often work well on the phone portion of 15 meters (21 MHz band). The 15 meter band will operate on the third harmonic of the 40 meter band . In order to save

One of the more popular amateur radio antennas is the multiband "Fan Dipole" and its close relative the multiband inverted vee "Fan Dipole."  According to Howard (W6HDG), the Fan Dipole "consists of  two or more distinct half wave dipoles which are mounted to a common parallel feed point so that a single feed line can be utilized."  With a little ingenuity and careful trimming, it is possible to make a single band dipole antenna work on several bands just by adding half wavelength dipoles for your favorite band to the center coax connector and by "fanning them out" below the dipole for the lowest frequency.  Add a 1:1 balun or a "choke" balun below the center connector, connect some 50 ohm coaxial cable, run the cable to your rig, and you're ready to go on your favorite bands without a "tuner" and a ground radial system. According to Simone (IW5EDI), "an antenna like this works on multiple bands because the antenna

Antenna transmatches or "tuners" are wonderful devices that make amateur radio operations easier.  They can help minimize swr on antenna feed lines and extend the band coverage of your present antenna. However, there are times when such devices may not be needed, especially if you're designing an antenna for a single band or are contemplating an emergency or portable antenna for your "go" kit.  By carefully designing, cutting, and trimming your basic 1/2 wavelength dipole for the lowest swr, you can just connect a good quality 50 ohm coaxial cable feed line and run the band of your choice without much difficulty. In this post, I will describe a few simple coax-fed dipoles and inverted vees that will serve your favored amateur radio band without the need for an antenna transmatch .  Of course, you could always insert a transmatch into the system to squeeze out the maximum power at the lowest possible swr if you so desire.  These antennas work either way.