Simple Ham Radio Antennas

If you can't see the video, please insert this title URL into your browser searchbox: https://www.youtube.com/watch?v=cS5nlutY_L4&ab_channel=KevinLoughin This is post 2444 in a continuing series of simple ham radio antennas. If you want an easy-to-build 40 meter antenna suitable for both home and field use, you can't beat the folded dipole.   Kevin Loughin (KB9RLW) tackles this project with his usual down-to-earth enthusiasm and creativity. You won't need expensive materials or excessive time to design, build, test, and use this antenna. Here are a few comments from Kevin: In all the years I've been playing radio, I've never built a folded dipole. Boy have I been missing out! These are amazing performers. Link to the 3D part for the center: https://www.thingiverse.com/thing:361... My video on making the 4:1 Balun: https://youtu.be/l5rLI8FpM9g A few pages with technical info on folded dipoles: https://www.electronics-notes.com/art... https://www.w8ji.com

If you can't see the video, please insert this title URL into your browser search box: https://www.youtube.com/watch?v=JCKrrKwTfXg&ab_channel=JimHaslett This is post 2443 in a continuing series of simple ham radio antennas. Thanks to Jim Haslett for making this useful and often necessary antenna accessory.  Choke baluns help keep common mode currents off your coaxial feedline and, thereby, protect your transceiver and boost efficiency of your antenna system. ----- Thanks for joining us today. Aloha es 73 de Russ (KH6JRM).  

How to build a PVC antenna mast. Views expressed in this tutorial are those of "imarunner2." Content supplied by "instructables circuits." Accessed on 06 December 2020, 2340 UTC, Post 2442. Source:   https://www.instructables.com/Portable-PVC-Conduit-Antenna-Mast/ Please scroll down to read the article. Thanks for joining us today. Aloha de Russ (KH6JRM). ----- If you need a portable, lightweight antenna mast for home or field use, then this excellent tutorial from the "instructables.com" website is for you. Step 1: Supplies (3) 10' x 1 1/4" PVC conduit (2) 1 1/4" PVC caps (3) Screw anchors (3) Eye bolts 100' x 3/16" nylon rope Landscape timber spike Add Tip Ask Question Comment Download Step 2: Cut Conduit Into Portable Sections Cut each length of conduit in half to make 5 foot sections. Five feet sections fit nicely in the trunk of my car. Adjust the dimensions to suit your needs. PVC conduit has one flared end which works well for

If you can't see the video, please insert this title URL into your browser search box: https://www.youtube.com/watch?v=BJ07Y-ScFoM&ab_channel=TechMinds This is post 2441 in a continuing series of simple ham radio antennas. If you want a fun and educational antenna experience, please try this 2 meter Halo Antenna Kit from Moonraker.eu. Matt from "Tech Minds" takes us step-by-step through the assembly and testing process for this omnidirectional, horizontally polarized VHF antenna. Here are some comment from Matt: You can purchase this antenna from Moonraker.eu via the following link: https://www.moonraker.eu/hlp-2-144mhz... As you can see in this video I desperately need a new camera to record these kind of videos. If you are feeling generous and like my video content you can check out my Amazon wish list or leave a small donation to my paypal. Please make sure you leave a NOTE so I can make sure you have a dedication on my next videos. https://www.amazon.co.uk/hz/

If you can't see the video, please insert this title URL into your browser search box: https://www.youtube.com/watch?v=dsyuotZyU_g&ab_channel=KevinLoughin This is post 2440 in a continuing series of simple ham radio antennas. Thanks to Kevin Loughin (KB9RLW) for this interesting antenna comparison.   In my experience, the folded dipole antenna tends to be a bit more broad banded than the "classic" HF dipole antenna. The folded dipole requires a 300-ohm balanced feeder and an antenna "tuner" for optimum performance. The folded dipole antenna is useful if you don't have a coaxial cable feed line.  The folded dipole is compact, easy to set up, and suitable for both home and field use. Here are some general comments from Kevin: I did some comparisons between a regular old wire dipole and a folded dipole made out of window line. Both cut for 20 meters and both installed similarly. If you like my videos, please subscribe here: http://www.youtube.com/user/lou

If you can't see the video, please insert this title URL into your browser search box: https://www.youtube.com/watch?v=qs-iC5mTo9k&ab_channel=DXCommander This is post 2439 in a continuing series of simple ham radio antennas. Thanks to Callum McCormick (M0MCX) for this enjoyable and often enlightening discussion of basic wire antennas. Here are some general comments from Callum: Let's look at antenna basics. Height above ground, resonance, folding back elements and more. Thanks to the Telford and District Amateur Radio Society for hosting my talk. 73. Callum. ----- Thanks for joining us today. Aloha es 73 de Russ (KH6JRM).  

If you can't see the video, please insert this title URL into your browser search box: https://www.youtube.com/watch?v=MOSf-k3ofUY This is post 2438 in a continuing series of simple ham radio antennas. Thanks to Gil of the "RadioPrepper.com" youtube channel for this useful and often necessary accessory for random wire multi-band end-fed wire antennas. The step-by-step assembly process is clear and easy to understand.  This would make an excellent weekend project. Here are some general comments from Gil: Building a 9:1 UNUN for a random-wire multi-band end-fed antenna using an FT-140-43 toroid instead of the usual T106-2. Presumably the ferrite toroid works better for the lower bands, 40 and 80m, and as well for the upper bands, I would guess up to 10m, not sure about 6m. It remains to be tested in an upcoming video. I should have measured SWR with a 470-Ohm resistor between ground and antenna wire but I forgot. A random wire by the way is any wire which is not a half-wave