Simple Ham Radio Antennas

The sloping 1/2 wavelength dipole is one of my favorite antennas.  "Slopers" are good antennas for restricted space areas.  They are simple to build, inexpensive, and exhibit some directivity in the your chosen direction. According to VK6YSF, VE2DPE, and other amateur radio operators, a properly designed 1/2 wavelength sloper radiates energy at low angles relative to the horizon with vertical polarization.  Slopers don't require a ground radial system and can be fed with a good grade of 50 ohm coaxial cable.  A sloper antenna only requires one tall support (tree, mast, edge of a roof, etc.) and occupies less space that a 1/2 wavelength horizontal dipole. So, let's build one of these simple, effective antennas for the 10 meter band , centering on 28.4 MHz --right in the middle of the techncian class phone band. MATERIALS: One tall support.  In my case, I used a 33-ft/10.06 meter MFJ telescoping fiberglass mast.. One 5-ft/1.52 meter wooden stake to support

The "classic" W3EDP antenna has been around since March 1936 when Yardley Beers (W3AWH/W0JF) described a multiband antenna built by his friend H.G. Siegel (W3EDP).  Siegel used the traditional method of "cut and try" to arrive at an antenna length that would work satisfactorily on 160, 80, 40, 20, and 10 meters. Beers remembered that "A length of 84 feet (25.60 meters) seemed to stand out as being the best of all the combinations tried."  A similar "test and tune" method was used to determine a satisfactory counterpoise length of 17 feet (5.18 meters), "as the one working best in combination with the antenna." Since that time, several variations of this true "Zepp" antenna have been developed to facilitate portable, emergency, and even home use.  Many QRP enthusiasts use some kind of W3EDP-derived antenna for their operations.  The W3EDP antenna is a simple, cheap, and field deployable.  The antenna requires a 1:1 or 4:1

One of my favorite pursuits in amateur radio is chasing DX (distance) contacts with hams living or visiting in remote places of the world, be they small nations, islands, or even mountain tops.  Each contact is a small adventure to a place I may never see. For the dedicated contester or DX enthusiast, there are many attractive awards (i.e. DXCC , WAS, WAC, etc.) to pursue. I'm more of a "casual" DXer , squeezing in contacts when house building or part-time teaching permit.  For those moments when I'm free of family responsibilities, I enjoy listening and working exotic, far off places.  Since I live on Hawaii Island , I'm often the "target" of DXers...a task I thoroughly enjoy. During my 37 years as an amateur radio operator, I've experienced both the joy of making a rare contact and the frustration of losing some elusive call in a rush of QRM.  Such is the DX experience. There must be an easier way of making DX contacts than wading through a

Over the past few years, I've built a variety of HF antennas for my amateur radio station.  All of my verticals, inverted vees, dipoles, and loops have been a learning experience, especially when I've been faced with limited resources and space.  Operating from an apartment or a home governed by CC&Rs and HOAs has been a challenge. Now that I'm slowly moving into a full acre of space in the rural Puna District of Hawaii Island, my space restrictions are gone and there are no committees to oversee my antenna activities.  I count this as a definite blessing.  For the first time in many years, I can build full sized dipoles, verticals with a decent ground system, and large full-wave loop antennas without interference.  Since my new property is surrounded by tall trees approaching 50 feet/15.24 meters, my antennas are well shielded from prying eyes.  When I operate out of my rental home in Laupahoehoe, I'm still hemmed in by utility poles and neighbors.  My antenna

Over the past 37 years as a licensed amateur operator, I've accumulated a wide variety of antenna reference material, including books, magazine articles, and topics discussed on amateur radio forums.  All ARRL members can further augment their antenna research by accessing the digital files of " QST ", the offical journal of the ARRL.  All told, there is an almost endless resource of antenna building ideas for most every ham station. Recently, I began to put some of these "classic ideas" to use on my new property in the Puna District of Hawaii Island .  I now have an acre of space to "plant" my antenna "farm"--quite a change from my present rental home which is hemmed in by neighbors and utility poles.  Although my neighbors have been tolerant of my amateur radio pursuits, I try to keep a low profile.  Namely, my verticals and inverted vees are usually lowered when they are not in use and, because of my part-time employment as a sports an